The story of the creation on the light house

 

First off I created my first box (the first half of my lighthouse) and extruded the top inwards to created the roof. then I made the walls and floor f my landscape with planes using soft selection to make it bumpy

Next I made the dishes to go around the side of my building by extruding half a sphere.

Next I made a box and extruded the top up to make the sides of the building

This is my finished pipe that I will the uses as the base of all the other pipes on the building by duplicating it. I added edge loops to it so when its is "3" it would look more squared

This is my finished light at the top of the building. is has the blue cone that is the light pointing at a mirror that reflects is out to sea and the pipe its on rotates around the disk at the bottom to make it a lighthouse.

Next I added all of the parts together and made my scenery

This is my final idea. it now has water and it is all textured correctly

This is my final idea with lights on it. I made it very dark to give it a spooky feel

final render 1

final render 2

final render 3

final render 4

 

My final renders highly represents my research. the texturing on the lighthouse is very space aged and it has a clean look to it with all the white and black solid panels. I made it dark so it would look like my dystopian research and it has a lot of blue lights of it to keep with the Sci-Fi futurism them. the camera angles are all from above like the images I found for futurism, this gives it a sense of scale (my lighthouse is suppose to look daunting and large). it has a laser/light on it to give it a Sci-fi look and a retro 90s idea of a futuristic building. The sharp edges and dishes along with the big pipes all over it make it very dystopian due to that style of Sci-Fi architecture being a lot like currant city architecture but with futuristic bits added to the top of it making it seem "apocalyptic". the last render is lighter so you can see the lighthouse clearer.